OTHM Level 6 Diploma in Occupational Health and Safety (OHS)

OTHM Level 6 Diploma in Occupational Health and Safety is an Ofqual-regulated qualification designed for professionals seeking to develop advanced knowledge and practical competence in occupational health and safety management. Set at RQF Level 6, this 60-credit diploma develops the capabilities required to manage workplace risks, strengthen health and safety management systems, support legal and regulatory compliance, investigate incidents and promote a positive safety culture. Learners are assessed through assignments and a portfolio of evidence instead of written exams, which keeps the focus on real workplace practice. Completion makes you eligible to apply for CertIOSH membership, therefore the diploma suits UAE safety officers who want a recognised step into HSE management. Through its approved OTHM centre status in the UAE, Eduskills Training provides learners with a route to pursue this recognised professional qualification.

Awarded by OTHM, UK.

Regulated Ofqual UK.

Work Based Online Learning And Assessments

600 Hours TQT (Total Qualification Time)

7 Mandatory Units

Total 220 GLH (Guided Learning Hours)

Total 60 Credits

No Exam – Work Base Coursework

Pathway To CertIOSH

Equivalent to Bachelor’s Degree, UK.

Fast Track Masters Degree Top-UP in UK.

Overview of OTHM Level 6 Diploma in Occupational Health and Safety:

The OTHM Level 6 Diploma in Occupational Health and Safety is a vocational qualification developed for individuals who manage, or aspire to manage, occupational health and safety policy and practice within an organisation. carries qualification number 603/5002/7, 60 credits and 600 hours of total qualification time. It is graded pass or fail, and every assessment is written in English.

It develops the knowledge and professional capabilities needed to evaluate safety arrangements, manage workplace risks, oversee incident management and recommend improvements to organisational procedures. The qualification also addresses health and safety legislation, management systems, leadership and the effective use of resources. Its focus is on preparing learners for greater responsibility in planning, implementing and reviewing workplace health and safety arrangements.

Qualification Purpose, Objectives and Learning Outcomes:

The primary purpose of this qualification is to develop competent HSE professionals who can contribute to the strategic and operational management of workplace safety.

Learners develop an understanding of the legal and regulatory framework, evaluate existing health and safety policies, and identify where improvements are required.

They also build capabilities in risk and incident management, resource planning, leadership and management systems. These learning areas support the practical application of safety principles across different organisational environments. Consequently, successful learners are better prepared to contribute to policy implementation, monitor safety performance and support continuous improvement in occupational health and safety practice.

RQF Level 6 Status and Academic Equivalence Explained:

The diploma is positioned at Level 6 of the Regulated Qualifications Framework (RQF), the framework used in England to classify regulated qualifications by their level of difficulty and learning achievement.

OTHM describes its Level 6 qualifications as comparable in academic level to Bachelor’s Degrees with Honours, bachelor’s degrees and certain other graduate-level qualifications. However, this comparison refers to the level of learning, not the award itself.

The OTHM Level 6 Diploma is a regulated vocational qualification and should not be represented as a university bachelor’s degree. Learners considering further study should check the specific admission and credit requirements of their chosen university.

Recognition and Regulatory Status of the Qualification:

OTHM is a UK-based awarding organisation approved and regulated by Ofqual UK, the Office of Qualifications and Examinations Regulation.

This OTHM Level 6 OHS Diploma is an Ofqual-regulated qualification listed within the RQF framework and this regulatory status provides a formal quality and assessment framework for the award.

OTHM is responsible for the qualification and its external quality assurance, while approved centres deliver the programme and conduct internal assessment.

Eduskills Training holds approval to deliver OTHM qualifications in the UAE. Successful diploma holders are also eligible to apply for IOSH Certified membership (CertIOSH), subject to IOSH’s applicable membership requirements.

Qualification Structure:

The OTHM Level 6 Diploma in Occupational Health and Safety comprises seven mandatory units designed to develop a broad understanding of professional health and safety management. Together, these units carry 60 credits and cover policy, management practice, risk control, workplace conditions, legislation, safety culture and professional development. The qualification also specifies 220 Guided Learning Hours (GLH) and 600 Total Qualification Time (TQT). These measures help learners and training centres understand the expected learning commitment, including supervised teaching, independent study and assessment activities.

Unit 1: Health and Safety Management Principles and Policy

Unit Reference Number	H/617/7539
Unit Title	Health and Safety Management Principles and Policy
Unit Level	6
Number of Credits	8
Total Qualification Time (TQT)	80
Guided Learning Hours (GLH)	30
Mandatory / Optional	Mandatory
Unit Grading Structure	Pass / Fail

Unit 2: Health and Safety Management Practice

Unit Reference Number	Y/617/8526
Unit Title	Health and Safety Management Practice
Unit Level	6
Number of Credits	10
Total Qualification Time (TQT)	100
Guided Learning Hours (GLH)	40
Mandatory / Optional	Mandatory
Unit Grading Structure	Pass / Fail

Unit 3: Risk and Incident Management

Unit Reference Number	Y/617/7540
Unit Title	Risk and Incident Management
Unit Level	6
Number of Credits	8
Total Qualification Time (TQT)	80
Guided Learning Hours (GLH)	30
Mandatory / Optional	Mandatory
Unit Grading Structure	Pass / Fail

Unit 4: Promoting a Positive Health and Safety Culture

Unit Reference Number	Y/617/8543
Unit Title	Promoting a Positive Health and Safety Culture
Unit Level	6
Number of Credits	6
Total Qualification Time (TQT)	60
Guided Learning Hours (GLH)	20
Mandatory / Optional	Mandatory
Unit Grading Structure	Pass / Fail

Unit 5: Maintaining a Safe Working Environment

Unit Reference Number	R/617/9092
Unit Title	Maintaining a Safe Working Environment
Unit Level	6
Number of Credits	12
Total Qualification Time (TQT)	120
Guided Learning Hours (GLH)	40
Mandatory / Optional	Mandatory
Unit Grading Structure	Pass / Fail

Unit 6: Health and Safety Law, Regulation and Influence

Unit Reference Number	H/617/7542
Unit Title	Health and Safety Law, Regulation and Influence
Unit Level	6
Number of Credits	8
Total Qualification Time (TQT)	80
Guided Learning Hours (GLH)	35
Mandatory / Optional	Mandatory
Unit Grading Structure	Pass / Fail

Unit 7: Development of the Health and Safety Practitioner

Unit Reference Number	K/617/7543
Unit Title	Development of the Health and Safety Practitioner
Unit Level	6
Number of Credits	8
Total Qualification Time (TQT)	80
Guided Learning Hours (GLH)	25
Mandatory / Optional	Mandatory
Unit Grading Structure	Pass / Fail

Guided Learning Hours and Total Qualification Time:

The qualification specifies 220 Guided Learning Hours (GLH) and 600 Total Qualification Time (TQT).

Guided Learning Hours: GLH refers to the time spent receiving direct teaching, training, supervision or other immediate learning support from tutors or qualified staff.

Total Qualification Time: TQT includes guided learning as well as independent study, preparation, research and time spent completing assessments.

The difference is important because the 600-hour figure represents the overall estimated learning commitment, not 600 hours of classroom attendance. One credit represents 10 hours of Total Qualification Time, giving the diploma its overall value of 60 credits.

Learning Outcomes of OTHM Level 6 Diploma in OHS:

H/617/7539: Health and Safety Management Principles and Policy

Understand the principles of health and safety management and its organisational systems.
Understand the principles of health and safety policy.
Be able to conduct a critical review of a health and safety policy in an organisation.
Be able to assess internal and external factors that influence health and safety practices.

Y/617/8526: Health and Safety Management Practice

Understand the process of planning and organising occupational health and safety practices in the workplace.
Understand the process of leading and controlling health and safety practices in the workplace.
Understand the process of reviewing the performance of health and safety practices in the workplace.
Understand the process of monitoring and auditing health and safety practices in the workplace.
Understand corporate social responsibilities and ethical codes of conduct and their impact on health
Understand the critical factors in the management of occupational health and well-being in the workplace.

Y/617/7540: Risk and Incident Management

Understand the processes and strategies for identifying hazards and evaluating risk levels when carrying out risk assessments in an organisation.
Understand the strategies and techniques of risk control.
Understand the models of loss causation, analysis of loss data and the importance of incident investigation.
Understand processes and strategies to manage health and safety incidents in an organisation.

Y/617/8543: Promoting a Positive Health and Safety Culture

Understand key organisational. factors that influence the health and safety culture in the workplace.
Understand key human factors that influence health and safety performance and behaviour in the workplace.
Understand the impact of leadership, structure and consultation on the health and safety culture of an organisation.
Be able to develop a strategy to improve the health and safety culture of an organisation.

R/617/9092: Maintaining a Safe Working Environment

Understand the range of factors to consider to maintain a safe work environment.
Understand the hazards, risks and controls applicable to a range of workplace contexts.
Understand the maintenance of fire safety and protection against explosion.
Understand safe storage, handling and management of hazardous substances, including biological agents.
Understand safe management of work equipment and machinery.

H/617/7542: Health and Safety Law, Regulation and Influence

Understand international frameworks for legislation, regulation and enforcement.
Understand statutory and regulatory obligations for maintaining health and safety in an organisation.
Understand the industry and community roles in influencing and promoting local and national positive health and safety outcomes.

K/617/7543: Development of the Health and Safety Practitioner

Understand roles and responsibilities of health and safety practitioners.
Be able to assess organisational competence and skills requirements for health and safety practitioners.
Be able to produce a personal and professional development plan in own area of responsibility as a health and safety practitioner.

OTHM Level 6 Diploma Entry Requirements and Eligibility:

This OTHM Level 6 OHS Diploma is intended for learners with an appropriate foundation in occupational health and safety or relevant practical experience. Applicants should understand that admission is based on the qualification’s entry criteria, including previous learning, age and English language competency. Meeting these requirements helps ensure learners are prepared for the academic and professional demands of an RQF Level 6 qualification.

Academic Qualifications and Relevant HSE Experience:

Applicants are normally expected to hold a relevant NQF, QCF or RQF certificate or diploma, or an equivalent recognised qualification covering fundamental occupational health and safety concepts. These include workplace safety, risk management, health and hygiene, safety management principles, relevant legal frameworks, occupational psychology, and basic IT, literacy and numeracy.

OTHM identifies qualifications such as the NEBOSH National General Certificate in Occupational Health and Safety, British Safety Council certificates, the NCFE IOSH Level 3 Certificate and the NCRQ Level 6 Certificate in Applied Health and Safety as examples.

Applicants should provide evidence of their previous qualification so Eduskills Training can assess its relevance to the entry requirements.

Mature Learner Entry Route and Practical Experience:

OTHM also allows consideration of mature applicants who are over 21 and have at least two years of practical experience. This route may be relevant to experienced HSE personnel who have developed workplace knowledge through professional responsibilities but do not hold one of the listed entry qualifications.

Practical experience should relate to occupational health and safety activities, such as workplace inspections, risk assessment, incident reporting, safety supervision or implementation of control measures. However, meeting the age and experience criteria does not automatically guarantee admission.

Each applicant’s background and suitability will be reviewed by the approved centre, Eduskills Training in line with OTHM’s requirements.

Minimum Age, English Language and Required Documents:

Learners must be at least 18 years old at the beginning of the course. Applicants who are not from a majority English-speaking country must also provide evidence of English language competency in accordance with OTHM’s English Language Expectations.

During enrolment, Eduskills Training may request documents such as academic certificates, identification, an updated CV and evidence of relevant professional experience, where applicable. Additional English language evidence may also be required. The exact document checklist will be confirmed before registration to ensure that the application is complete.

OTHM Level 6 Diploma Assessment, Evidence and Grading:

The OTHM Level 6 Diploma in Occupational Health and Safety follows a structured, criteria-based assessment approach. Rather than relying solely on a final examination, learners demonstrate their understanding through assignments and a portfolio of evidence. Assessment focuses on whether learners can meet the specified learning outcomes and assessment criteria for each unit. The qualification uses an overall Pass or Fail grading system, with achievement determined by the quality and sufficiency of the submitted evidence.

Assignment-Based Assessment and Portfolio of Evidence:

Assessment is based on assignments and a portfolio of evidence that demonstrate the learner’s knowledge, understanding and ability to apply occupational health and safety principles. Depending on the unit requirements, learners may need to analyse workplace situations, evaluate management arrangements, explain legal responsibilities, assess risks or recommend improvements to safety procedures. Evidence must address the relevant learning outcomes and assessment criteria rather than simply describe general HSE knowledge. OTHM provides specific assessment guidance and marking criteria through unit assignment briefs. Learners should therefore prepare structured, relevant and properly supported submissions that demonstrate their own understanding of the subject.

Internal Assessment and External Verification by OTHM:

Assessment takes place through the Eduskills Training’s internal assessment process. A qualified assessor reviews each submission against the relevant assessment criteria, determines whether the required standards have been met and maintains an audit trail explaining the assessment decision. OTHM then provides external verification to monitor the consistency and quality of assessment. This process helps ensure that decisions are based on the published qualification requirements rather than personal judgement alone. Where a learner has not yet achieved the required standard, Eduskills Training has a feedback mechanism to identify areas for improvement and support reassessment in accordance with its procedures.

Learning Outcomes, Assessment Criteria and Passing:

To achieve a pass in a unit, learners must provide sufficient evidence that they have met all specified learning outcomes and the associated assessment criteria. These criteria define the standard of performance expected and guide the assessor when evaluating submitted work. A strong submission should address each task directly, use relevant occupational health and safety knowledge and demonstrate appropriate analysis, evaluation or recommendations where required. The diploma is graded on a Pass or Fail basis, not through a percentage-based classification stated in the qualification specification. Successful completion requires achievement of the required standard across all mandatory units.

OTHM Level 6 Diploma Duration and Learning Methods:

The OTHM Level 6 Diploma in Occupational Health and Safety is designed to accommodate different learner circumstances through flexible delivery arrangements. OTHM indicates an approximate four-month duration for full-time study, while part-time, distance and blended learning can accommodate different study commitments. The actual timetable depends on the Eduskills Training’s delivery plan, learner availability and progress through the assessment requirements. Applicants should confirm the current course schedule and available study format before enrolment.

Official Qualification Duration and Study Commitment:

The indicative full-time study duration for OTHM Level 6 Diploma in Occupational Health and Safety is approximately four months. However, the actual completion time may vary depending on the learner’s study schedule and progress.

Key study duration and commitment details:

Indicative Duration: Approximately four months for full-time study, as indicated by OTHM.
Guided Learning Hours (GLH): 220 hours of guided learning, including structured teaching, tutorials and other supervised learning activities.
Total Qualification Time (TQT): 600 hours, covering guided learning, independent study, research and assessment preparation.
Independent Study: Learners should allocate additional time to review learning materials, research technical HSE topics and develop their understanding of each unit.
Assessment Commitment: Sufficient time is required to complete assignments, gather relevant evidence and address all required learning outcomes and assessment criteria.
Part-Time Study: Learners following a part-time schedule may need longer to complete the qualification, depending on their available study time and individual progress.

Important: The four-month duration is an indicative full-time study period, not a guaranteed completion deadline. Actual study schedules depend on the delivery arrangements and the learner’s progress.

Face-To-Face and, Online Learning Delivery:

OTHM permits Eduskills Trianing to select delivery methods that meet learners’ needs while maintaining the required learning experience and assessment standards. The published qualification information includes face-to-face learning, lectures, tutorials, seminars, distance learning and online delivery.

Availability of each option depends on the Eduskills Training’s programme and delivery arrangements. Prospective learners in the UAE should confirm whether classroom, online or blended study is currently available, together with the timetable, attendance expectations and assessment submission arrangements.

Study Support for Working HSE Professionals and Learners:

For working HSE professionals, effective study planning is essential when balancing employment responsibilities with a Level 6 qualification. Learners should allocate time for reviewing unit materials, researching occupational health and safety issues, preparing assignments and responding to assessor feedback. They should also use relevant workplace experience to understand the practical application of topics such as risk management, incident investigation, safety policy and regulatory compliance, while ensuring that submitted work meets the qualification’s assessment requirements. Before enrolment, learners can discuss Eduskills Training’s tutor guidance, academic support, feedback arrangements and assessment schedule to understand the support available throughout the programme.

OTHM Level 6 OHS Diploma Recognition and Career Progression:

The OTHM Level 6 Diploma in Occupational Health and Safety is an Ofqual-regulated qualification positioned at RQF Level 6. Its recognition and progression routes can support further professional development, including eligibility to apply for IOSH Certified membership and opportunities to explore higher-level academic study. However, qualification achievement, professional membership and university admission are separate processes. Each organisation applies its own requirements, so learners should confirm the relevant conditions before making career or study decisions.

Applying for IOSH Certified Membership (CertIOSH):

Successful completion of the OTHM Level 6 Diploma in Occupational Health and Safety makes learners eligible to apply for IOSH Certified membership (CertIOSH), subject to IOSH’s membership application requirements. This provides a professional progression route for individuals seeking recognition of their occupational safety knowledge and competence. Certified membership is not automatically awarded when the diploma is completed. Applicants must submit an application and satisfy the requirements set by IOSH at the time of application. Maintaining professional competence through continuing professional development is also important for members. Learners should consult IOSH directly for the latest membership criteria, application process and applicable fees.

Initial Professional Development for Chartered Status:

Chartered membership of IOSH, known as CMIOSH, represents a further stage of professional development. The OTHM specification describes progression through Initial Professional Development (IPD), involving evidence of professional practice and a review process. However, IOSH has since replaced the former IPD route with its Professional Development Assessment (PDA) route for eligible Certified Members. This process assesses professional knowledge, skills and experience, alongside ongoing CPD and ethical practice requirements. Therefore, completing the OTHM diploma or obtaining CertIOSH does not automatically confer Chartered status. Learners should follow IOSH’s current membership guidance when planning this progression.

Further Study and OTHM Level 7 Progression Routes:

After completing the Level 6 diploma, learners may consider further study, including the OTHM Level 7 Diploma in Occupational Health and Safety Management. This higher-level qualification focuses on strategic health and safety management, organisational performance, risk intervention and advanced professional practice. The OTHM Level 7 qualification has its own entry requirements, which include a relevant Level 6 qualification or an accepted equivalent route. OTHM also publishes university progression arrangements for selected qualifications, including opportunities to progress towards relevant postgraduate programmes. Admission, advanced standing and credit exemptions remain subject to the receiving university’s requirements and individual assessment.

University Top-Up and Master’s Degree Progression Routes:

OTHM’s progression page lists two confirmed routes for this diploma. The University of Greenwich offers progression to its MSc Safety, Health and Environment and its MSc Occupational Hygiene. Edith Cowan University in Australia offers progression to its Graduate Certificate and Graduate Diploma in Occupational Health and Safety. However, OTHM adds that each applicant is assessed individually, so check the current entry rules with the university before you commit.

Benefits of Studying the OTHM Level 7 Diploma OHSM:

The OTHM Diploma is built around what you can do at work, not only what you can recall in an exam. Each benefit below comes from the qualification’s own structure and from OTHM’s published information.

Work Based Learning:

Demonstrate your understanding through assignments and a portfolio of evidence rather than relying solely on a final written examination. Assessment is based on meeting the qualification’s specified learning outcomes and criteria.

No Examination:

There are no sit-in exams for OTHM level 6 OHS Diploma. Every unit is an assignment based assessment, graded Pass or Fail.

Ofqual-Regulated Award:

Earn an Ofqual-regulated RQF Level 6 qualification awarded by OTHM. Its regulated status provides a recognised framework for qualification standards, assessment and external quality assurance.

Face-to-Face and Online Study:

Eduskills Training deliver OTHM Level 6 Diploma in OHS face to face and online in the UAE, so you can choose the format that fits your work schedule and location.

Seven Specialist Learning Units:

Study seven mandatory units covering safety management principles, policy, risk and incident management, workplace conditions, legislation, safety culture and professional development. The complete qualification carries 60 credits.

Pathway To CertIOSH & CMIOSH:

Successful learners become eligible to apply for IOSH Certified membership (CertIOSH), subject to IOSH’s membership requirements. This provides a professional progression route for developing occupational safety practitioners.

Equivalent to Bachelor's Degree-Level:

Positioned at RQF Level 6, the OTHM Level 6 OHS Diploma is comparable in academic level to a UK Bachelor’s degree. However, it is a professional diploma, not a Bachelor’s degree.

Route to a Master’s Degree:

Progress to a relevant Master’s degree through eligible university top-up or postgraduate pathways. Admission and credit transfer are subject to the receiving university’s entry requirements and recognition policies.

Advanced HSE Management Skills:

Develop professional capabilities in risk management, incident investigation, safety leadership, legal compliance and workplace safety performance. These skills support effective involvement in organisational HSE management.

Career Progression:

Strengthen your professional profile for opportunities in construction, oil and gas, petrochemicals, manufacturing, logistics and facilities management. Career progression depends on your experience, competence and employer requirements.

Why Study the OTHM Level 6 Diploma With Eduskills UAE?

Officially Approved OTHM Centre in the UAE:

Eduskills Training holds approval to deliver the OTHM Level 6 Diploma in OHS in the UAE. This means learners can pursue the qualification through an approved delivery centre while OTHM remains the awarding organisation responsible for the qualification framework and external quality assurance. Applicants can contact the Eduskills’ team to confirm current registration arrangements, eligibility requirements and the information needed to begin their application.

Our approved OTHM programmes are:

OTHM Level 5 Diploma in Business Management
OTHM Level 5 Certificate in Occupational Health and Safety
OTHM Level 6 Diploma in Occupational Health and Safety
OTHM Level 7 Diploma in Occupational Health and Safety Management
OTHM Level 7 Diploma in Environmental and Sustainability Management

The Level 6 diploma is also an entry route to this OTHM Level 7 Diploma, so learners can progress from one to the other.

Trainer Expertise and Learner Academic Support:

Eduskills Training focus on providing structured academic guidance that helps learners understand advanced HSE concepts and apply them to professional workplace situations.

Our training approach emphasises the practical relevance of topics such as risk assessment, incident investigation, safety management systems and regulatory compliance. Throughout the qualification, learners receive guidance on unit requirements, assignment briefs, assessment criteria and submission expectations.

We also aim to provide constructive feedback and academic support to help learners strengthen their understanding and develop original, well-structured assignments. This approach supports working professionals in managing their study commitments while developing the knowledge and competence expected at RQF Level 6.

Course Delivery, Guidance and Enrolment Assistance:

We aim to make the enrolment and learning process clear, organised and accessible for every learner. Our team guides prospective learners through the programme arrangements, qualification requirements and assessment process so they can make informed decisions and plan their studies effectively.

We provide guidance on the following areas:

Course Delivery: We explain the available study modes and delivery arrangements, helping learners understand their options before enrolment.
Course Schedule: We share programme timetables and expected study commitments so learners can plan their learning alongside professional responsibilities.
Qualification Requirements: We guide learners through the seven mandatory units, 220 Guided Learning Hours (GLH) and 600 Total Qualification Time (TQT).
Learning Materials: We provide information about the learning resources and study materials available throughout the programme.
Assessment Guidance: We explain assignment requirements, assessment criteria and submission procedures in accordance with OTHM guidelines.
Tutor Communication: We clarify how learners can communicate with tutors and access available academic guidance during their studies.
Fees and Enrolment: We explain the applicable course fees, registration requirements and supporting documents needed to complete the enrolment process.

Frequent Asked Questions (FAQs):

Is the OTHM Level 6 Diploma in OHS recognised in the UK and internationally?

The OTHM level 7 diploma in OHS qualification is regulated by Ofqual within the UK RQF framework. Its acceptance for employment, further study or professional recognition outside the UK depends on the relevant employer, institution or professional body’s requirements.

Is the OTHM Level 6 Diploma equivalent to a bachelor's degree?

It is comparable in academic level to a bachelor’s degree, but it is not itself a university bachelor’s degree. Recognition and admission decisions remain subject to the receiving institution’s requirements.

How many credits does the OTHM Level 6 Diploma carry?

The qualification carries 60 credits, distributed across seven mandatory units covering occupational health and safety management.

What are the Guided Learning Hours and Total Qualification Time?

The qualification specifies 220 Guided Learning Hours (GLH) and 600 Total Qualification Time (TQT). TQT includes supervised learning, independent study and assessment preparation.

What are the entry requirements for the OTHM Level 6 Diploma in OHS?

Applicants normally need a relevant recognised occupational health and safety qualification covering fundamental HSE concepts. OTHM also allows consideration of mature learners over 21 with at least two years of practical experience.

Can you enrol without a previous NEBOSH qualification?

Yes, NEBOSH is not the only accepted entry route. OTHM recognises other relevant qualifications covering the required foundational HSE concepts, while eligible mature learners may also be considered.

Does the OTHM Level 6 Diploma in OHS require examinations?

The OTHM Level 6 health and safety diploma qualification is assessed through assignments and a portfolio of evidence rather than relying solely on a final examination. Learners must demonstrate achievement against the specified unit learning outcomes and assessment criteria.

How is the OTHM Level 6 Diploma assessed and graded?

Eduskills Training internally assesses each unit, and OTHM externally verifies the assessment process. Learners receive an overall Pass or Fail result based on meeting the required assessment criteria.

How long does it take to complete the OTHM Level 6 Diploma in OHS with Eduskills Training in UAE?

OTHM indicates an approximate duration of four months for full-time study. Part-time and distance or blended arrangements may follow different schedules depending on Eduskills Training.

Does completing the OTHM Level 6 Diploma make me eligible for CertIOSH?

Successful diploma holders are eligible to apply for IOSH Certified membership (CertIOSH), subject to IOSH’s application and membership requirements. Membership is not awarded automatically with the qualification.